February 14, 2011

Valentine's Day Reversible Table Runner Tutorial

Just in case anyone missed the Valentine's Day Reversible Table Runner Tutoria,l when my guest post debuted on CraftyTammie's blog... Enjoy!

Materials:

  • Main Focus Fabric (Front and Back Border): 1/2 yard
  • Coordinating Fabric (Front Border and Back): 1/2 yard
  • Binding: 2.25" x +/- 113"
  • Quilt Batting: 13.5" x 40"
  • Heat n' Bond (optional)
  • Sewing Machine
1. From the Main Focus Fabric, cut one 9.5" x 36" piece for the Front of the table runner, and two 2.5" x 13.5" and two 2.5" x 36" pieces for the Border on the back side.

2. From the Coordinating Fabric, cut two 2.5" x 13.5" and two 2.5" x 36" pieces for the Border on the front side, and cut one 9.5" x 36" piece for the Back of the table runner.


3. With right sides together, and using a 1/4" seam allowance, sew the 2.5" x 36" Border pieces to the Main Focus Fabric (9.5" x 36"). Press seams toward the darker fabric.


4. Repeat Step #3, sewing the 2.5" x 13.5" Border pieces to the Main Focus Fabric (9.5" x 36"). Press seams toward the darker fabric.

5. The back of the table runner will be the inverse of the front, so with right sides together, sew the 2.5" x 36" Border pieces to the 9.5" x 36" Coordinating Fabric. Press seams toward the darker fabric.


6. Repeat Step #5, sewing the 2.5" x 13.5" Border pieces to the Coordinating Fabric. Press seams toward the darker fabric.


7. Sandwich the quilt batting between the wrong sides of the Front and Back of the table runner and quilt as desired. (Note- I quilted diagonal lines, spaced at about 2.25" which mimicked the fabric pattern.)

8. For the Binding, cut 2.25" strips and piece together for a total of +/- 113".(Note- I used various coordinating fabrics for the Binding, but you don't have to.Feel free to piece together the same fabric for a uniform Binding).To piece the strips, place the fabric right sides together, perpendicular to each other, and sew across the two strips at a 45 degree angle.Trim excess fabric at 1/4" and press seam open.

9. With wrong sides together, press the Binding in half.The table runner Binding will be sewn on just like quilt binding, so with a 1/4" seam allowance, sew the raw edge of the Binding to the back side of the table runner (leaving a +/- 6" tail from the start of the Binding).When approaching the corners, make sure to stop 1/4” from the corner, lift your needle and presser foot and fold the binding up onto itself. Fold the Binding down again, aligning the raw edges and resume stitching.

10. When approaching the start of the Binding, with right sides together, stitch the end of the Binding to the tail of the Binding (from Step #9).Finish sewing the raw edge of the Binding to the back side of the table runner.

11. Fold over the Binding to the front and hand or machine stitch the Binding in place, making sure to neatly miter the corners.


12. The reversible table runner is now complete, however should you want to add any additional elements feel free to!I chose to add 'love' to both ends of the table runner (which I cut out with Cricut), and backed with Heat n' Bond, which keeps the reversible functionality of the table runner.

13. Enjoy!

4 comments:

I LOVE your comments, and read them all! Thank you! :)